Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Overland?
Garage door repair in Overland typically costs $150 – $600, depending on what failed. Most single spring replacements land in the $180 – $340 range, while a new door installation runs $700 – $2200. Those are estimated ranges for the Overland market; the written estimate you get on site sets the final price.
We work on the door you already have. Our technicians have up to 12 years of experience with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor products, so a diagnosis usually starts with the brand instead of a long guessing game. Spring repair is handled in-house, which matters for one of the most safety-sensitive jobs in the trade. Call (844) 745-3717. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical garage door repair in Overland: $150 – $600.
- A single spring: $180 – $340. A matched pair is usually replaced together, so expect about double.
- New door installation: $700 – $2200.
- Estimates are free, and the written quote – not the range on this page – is the price you pay.
- Same-day and emergency service are available when the door has to work today.
Garage Door Cost Breakdown (2026)
The table below covers the jobs we’re called out for most in Overland. Each range is a typical estimate for the work itself. Treat these as planning numbers, not quotes.
| Service | Typical estimate | What it covers |
|---|---|---|
| Garage Door Repair (general) | $150 – $600 | Diagnosis and fix for doors that bind, stick, sag or won’t close all the way |
| Spring Repair (one spring) | $180 – $340 | Replacement of a single torsion or extension spring. A matched pair is usually done together, so a pair costs about twice this |
| Cable Repair | $130 – $250 | Frayed or snapped lift cables on one side of the door |
| Opener Repair | $120 – $320 | Board, gear, capacitor, safety sensor or remote issues on LiftMaster, Chamberlain, Genie and Craftsman units |
| Opener Installation | $250 – $550 | New opener mounted, wired and paired, including smart-home setup |
| Panel Replacement | $250 – $500 | One damaged section on a multi-panel door |
| Track Realignment | $120 – $240 | Track bent out of line after a strike or hard stop |
| Roller Replacement | $110 – $220 | Worn rollers that make the door rattle or jump the track |
| New Door Installation | $700 – $2200 | Full door replacement, hardware and opener pairing included |
What pushes a job toward the top of its range? A spring job on a door with rusted torsion hardware takes longer than one on newer hardware. A cable that snapped because the drum was worn means both get addressed. Panel replacement on a discontinued Clopay or Amarr color can cost more than the standard range because the matching panel has to be sourced. And a door that’s badly out of square needs track and roller work on top of whatever started the call. Opener electronics run the other direction – a sensor or logic board swap on a Chamberlain or Genie unit is often at the low end, because the fix is targeted and the part is common.
What Affects Garage Door Pricing in Overland
Overland’s housing stock is a big part of why prices here look the way they do. The city is full of mid-century ranches and post-war bungalows where the original wooden doors have been replaced once, sometimes with a mismatched opener added at the same time. That mix changes what a technician actually walks into.
- Door age and hardware condition. Old extension-spring setups, common on doors of a certain era, cost more to convert to torsion than working on a torsion door that’s already there. Rusted hinges and drums get added to the ticket.
- Brand and part availability. A Wayne Dalton or Raynor door often needs brand-specific parts. We’re factory-familiar with both, and with the other six brands we service, so the parts call goes out sooner and the door gets fixed faster. Brands we don’t stock get priced after the part is sourced.
- Single vs. double door. A two-car door carries heavier springs and a stronger opener. Every component costs more than the same job on a single door.
- Opener type. A basic Craftsman chain drive is a quick repair. A LiftMaster or Chamberlain smart opener with battery backup and a camera has electronics that take longer to diagnose, which shows up in the opener repair range.
- How the door is mounted. Low-headroom setups, which turn up in some of Overland’s older garages, limit what opener and spring configuration will fit. That’s a design constraint, not a markup.
- Whether a repair will do. We won’t pitch a replacement when a repair works. A door with one bent panel and a snapped cable is a $250 – $500 panel job plus a cable repair, not a new door. A door with rot through two panels and a bowed track is a different conversation.
How to Save on Garage Door
The single biggest cost saver is catching the problem early. A door that’s started squealing at the hinges or slowing down on the way up usually needs lubrication or a roller swap in the $110 – $220 range. Left alone for a season, that same door wears the opener gear down and turns into an opener repair on top.
- Fix it before it fails. Rollers and cables are cheap to replace when they’re worn. They’re not cheap when a snapped cable takes the door off its track and bends a panel. If you hear a rattle or see a frayed cable, get it looked at.
- Never skip a written estimate. A printed range specific to your door beats any phone guess. Estimates are free, and you’ll know the number before anything is touched.
- Repair, don’t replace, when repair is honest. If a technician tells you the door has another several years in it, believe the number. Replacing a working door is the most expensive way to solve a small problem.
- Keep the opener matched to the door. An oversized opener on a light single door wears out the door hardware. A correctly sized one lasts longer on both ends.
- Ask about the matched pair. When one spring goes, the other is usually the same age and under the same load. Replacing both at once costs about twice the single-spring range, but it saves a second service call later.
- Don’t stretch a repair across a cold snap. Metal contracts in a St. Louis winter, and a door that already sticks will stick harder. A $120 – $240 track realignment before the cold beats a bent panel after it.
Not sure whether your issue is a small fix or a bigger job? Call (844) 745-3717 for a free estimate. We’ll tell you what it needs and what it doesn’t.
Is It Cheaper to Repair or Replace a Garage Door in Overland?
Repair is almost always cheaper when the door structure is sound. A $180 – $340 spring replacement or a $130 – $250 cable repair on a door with straight panels and a true track will outlast a new door. Replacement makes sense when the door has rot through multiple panels, a bent track that won’t align, or hardware so far past its service life that repairs would stack up past the $700 – $2200 installation range.
The honest test: can the door be made safe and reliable for less than half the cost of a new door? If yes, repair. If the technician tells you it’s borderline, ask them to write both numbers down. Call (844) 745-3717 for a free estimate with both options on paper.
When Should You Call Instead of Waiting?
Call right away if a spring has snapped, the door is hanging at an angle, or the cable is off the drum. Those are safety-critical. A garage door under spring tension can cause serious injury if someone tries to lift it or adjust the springs without training and the right tools. We’d rather you call and wait than attempt it. The local pro is licensed and insured as their state requires.
A door that won’t close, an opener that’s stopped responding, or a door that’s started to shake and rattle can usually wait for a scheduled visit, though sooner is cheaper. Emergency garage door service is a core part of what we do, not something added to the end of the schedule. Same-day service is available in Overland when the door has to work today. Call (844) 745-3717. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Opener Repairs Are Their Own Job
Most door companies treat the opener as a side item. We treat it as its own specialty. A Genie logic board, a LiftMaster gear, a Chamberlain remote that’s stopped pairing after a power blink, a Craftsman safety sensor that’s throwing a fault – those are electronics problems, not door problems, and they get diagnosed that way. That’s part of why our opener repair range stays tight at $120 – $320 instead of ballooning into a replacement push.
How Overland’s Weather Shifts the Cost
Overland gets the full St. Louis swing: hot, humid summers and cold winters where temperatures drop well below freezing. That cycle stresses garage door hardware year-round. Springs expand and contract, which shortens their life compared to a milder climate. Wooden doors swell in the summer humidity and shrink in winter, which shows up as a door that closes differently in January versus July. Cold-weather months are when most cable and spring calls come in, and that’s also when a roller replacement done early saves a track repair later.
We see the same pattern across the region. If you’re in a neighboring city, the pricing and the physics are similar – the Florissant garage door repair page covers the same ranges for that market.
What to Expect on the Visit
Here’s how a typical cost estimate visit goes. A technician looks at the door, opener and hardware together, not just the part you called about. The door gets cycled manually to check balance and alignment. The springs, cables, rollers and hinges get inspected. The opener gets tested through a full open and close cycle, including the safety reverse. Then you get a written estimate that lists each recommended repair and its price, plus anything that can safely wait.
You decide what gets done. If the estimate covers more than you expected, ask the technician to prioritize safety items first and schedule the rest. We don’t quote a number on the phone and surprise you on arrival – the written estimate is the price.
Repair Costs by Brand: What’s Different
Not every brand prices the same way. LiftMaster and Chamberlain share a lot of parts, so opener repairs on those units are usually fast and straightforward. Genie has its own logic boards, which may cost more. Craftsman units vary widely by generation, and older ones can need a whole assembly swap. Clopay and Amarr doors have panel profiles that determine whether a single panel replacement can match. Wayne Dalton and Raynor doors often need brand-specific parts, and being factory-familiar means the parts call goes out immediately instead of after a second visit.
- LiftMaster / Chamberlain: opener repairs typically at the low to middle of the $120 – $320 range.
- Genie: electronics and logic board work often at the middle to upper end.
- Craftsman: varies by age; older units may need a full assembly replacement.
- Clopay / Amarr: panel replacement stays in the $250 – $500 range unless a discontinued profile needs sourcing.
- Wayne Dalton / Raynor: brand-specific hardware, priced after the part is identified.
Frequently Asked Questions – Garage Door Cost
How much does garage door repair cost in Overland?
Garage door repair in Overland typically costs $150 – $600. The exact price depends on what failed. A single spring is $180 – $340, a cable is $130 – $250, and an opener repair is $120 – $320. Call (844) 745-3717 for an exact quote – estimates are free.
How much does garage door spring repair cost in Overland?
One spring is $180 – $340. A matched pair is usually replaced together, so a pair costs about twice that. Springs are under high tension, so this is not a job to attempt without training and the right tools. Call (844) 745-3717 for an exact quote – estimates are free.
How much does a new garage door cost in Overland?
New door installation in Overland typically runs $700 – $2200. The range depends on door size, material and whether a new opener is added. Call (844) 745-3717 for an exact quote – estimates are free.
Can you come today?
Same-day service is often available in Overland, and emergency garage door service is a core offering. Call (844) 745-3717. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Is it cheaper to repair or replace?
Repair is almost always cheaper when the door is structurally sound. A $180 – $340 spring replacement on a solid door beats a $700 – $2200 installation. Replacement makes sense only when the door has rot, a bent track that won’t align, or hardware past its service life. Call (844) 745-3717 for an exact quote – estimates are free.
Ready to Get a Free Estimate in Overland?
Garage doors fail on their own schedule, and Overland’s cold snaps and humid summers speed up the wear. Whether it’s a snapped spring, a cable off the drum, an opener that’s stopped talking to its remotes, or a full door replacement, we’ll give you a written estimate before any work starts. The written estimate is the price. We work on the door you have, we handle spring repair in-house, and we’ll tell you straight if a repair will do.
Call (844) 745-3717 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day and emergency service are available when the door has to work today.
Written by the team at Florissant Garage Door Repair Pros.
Pricing reflects the Overland market as of 2026. Florissant Garage Door Repair Pros offers free estimates – call (844) 745-3717.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Heather Norris"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Laura Ackerman"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Kevin Gallagher